Xenon lamp aging test chamber -Climate test Chamber

Xenon lamp aging test chamber -Climate test Chamber

Model No.︰HMXD80LA

Brand Name︰HarmonyWOLRD

Country of Origin︰China

Unit Price︰-

Minimum Order︰1 pc

Inquire Now

Product Description

DESCRIPTION

The xenon lamp test box uses a xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, and can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control. The xenon lamp test chamber can be used for the selection of new materials, the improvement of existing materials or the evaluation of durability changes after the composition of the materials is changed. It can well simulate the changes caused by the materials exposed to the sun under different environmental conditions.
Meet the standards: GB/T16585-1996; GB14522-93; GB/T16422.3-97; ASTM D2565

Function

 Full spectrum xenon lamp.
◆ A variety of filter systems for selection.
◆ Water spray function.
◆ Relative humidity control.
◆ Test chamber air temperature control system.
◆ Irregularly shaped flat product rack for easy placement of products
◆ Domestic water-cooled xenon arc tube. (U.S. original imported lamps can be customized)
◆ It is easy to install and use and basically does not require routine maintenance.
◆The service life of the xenon arc lamp tube depends on the level of radiation illuminance used. The life of the general lamp tube is 1600 hours. The lamp can be replaced quickly and easily, and the long-lasting filter provides protection for maintaining the required spectrum.
◆The latest air-cooled xenon lamp solves the problem of high failure rate of the water-cooled xenon lamp cooling method. It is convenient for users to replace the lamp by themselves; maintenance is simple and convenient.

 

Overview

Xenon lamp aging test is a comprehensive weather test device. In addition to weather aging test, it can also test the optical resistance of high-resolution materials, that is, polymer materials are exposed to artificial light sources that simulate the sunlight spectrum through glass to evaluate materials Rotation resistance. Carry out simulation and intensified experiments from the main climatic factors of light energy, temperature, rainfall or condensation, humidity; use xenon arc lamps that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments; xenon lamp weather resistance test The box can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control, and can be used for tests such as the selection of new materials, the improvement of existing materials, or the evaluation of changes in durability after changes in material composition; suitable for plastics, rubber, paints , Paint, ink, paper, medicine, food, cosmetics, textiles, auto parts, packaging materials, building materials, electrical and electrical products, etc
.
The xenon lamp test box uses a xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, and can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control.

The xenon lamp test chamber can be used for tests such as the selection of new materials, the improvement of existing materials, or the evaluation of changes in durability after changes in the composition of materials. It can well simulate the changes in materials exposed to sunlight under different environmental conditions.

Simulate full sunlight spectrum
The optical resistance of the material is measured by exposing the material to ultraviolet (UV), visible light and infrared light. It uses a filtered xenon arc lamp to produce a full sunlight spectrum with the greatest consistency with sunlight. The xenon arc lamp with reasonable filtering treatment is the best way to test the product's sensitivity to longer wavelength ultraviolet and visible light in direct light or sunlight through glass.

Optical resistance test of indoor materials
Due to long-term exposure to fluorescent lamps, halogen lamps or other light-emitting lamps, products placed in retail outlets, warehouses or other environments will also experience significant photodegradation. The SN xenon lamp test chamber can simulate and reproduce the destructive light in such commercial lighting environment, and can accelerate the test process with higher intensity.

Simulated climate environment
In addition to the photodegradation test, the SN xenon lamp test box can also become a weathering test box by adding a water spray option to simulate the influence of outdoor moisture on materials.

Xenon lamp weather resistance test box product features:
◆Full spectrum xenon lamp.
◆Various filter systems for selection.
◆Water spray function.
◆Relative humidity control.
◆Test chamber air temperature control system.
◆ Irregularly shaped sample holder.
◆ Cheap and good quality xenon arc tube.
◆It is easy to install and use and basically does not require routine maintenance.
◆The service life of the xenon arc lamp tube depends on the level of radiation illuminance used. The life of the general lamp tube is 1600 hours. The lamp can be replaced quickly and easily, and the long-lasting filter provides protection for maintaining the required spectrum.

Executive standard

GB12831-86 vulcanized rubber artificial climate (xenon lamp) aging test method
GB/T1644.2-1999 Plastic laboratory light source exposure test method (Part 2: Arc xenon lamp)
GB/T8427-89 Textile color fastness test, color fastness to artificial light xenon arc
GB/T8430-98 Textile color fastness test, color fastness to artificial light xenon arc
GB/T1865-97 color paint, varnish, artificial weathering and artificial radiation exposure (filtered xenon arc radiation)
GB/T16991-97 Textile color fastness test High temperature light fastness: xenon lamp
GB/T5137.3-96 Test Method for Resistance to Radiation, High Temperature, Humidity, Combustion and Weather Simulation of Automobile Safety Glass GB/T16259-96 Colored building materials, artificial climate acceleration, color aging test method.
GB/T2423.24-95 Environmental Test of Electronic and Electrical Products Part 2: Test Method, Test SQ: Simulate solar radiation on the ground.

 

SPECIFICATION

 

Studio size D×W×H: 950×950×850mm
Appearance size D×W×H: 1350×1400×2100mm
Temperature range: 0℃~80℃ (not within the measurement range)
Temperature deviation: ±2℃ (without lighting)
Humidity range: 30~98%R.H Humidity deviation: ±2.5%R.H (humidity≥75%R.H) ±3%R.H(humidity≤75%R.H) (without light)
Type of light source: Water-cooled full solar spectrum long arc xenon lamp (average service life is about 1200 hours)
Rain time: 1~9999 minutes, adjustable
Rain cycle: 1~240 minutes, adjustable interval (break)
Spectral wavelength: 290nm~1200nm
Xenon lamp power: 1CW, 6KW (lifetime: 1600 hours)
Xenon lamp power: 6KW
Light source wavelength range: 290-1200nm
Heating power: about 6KW
Humidification power: about 4KW
Light source irradiance: Spectrum 290-1200nm 300-1200w/m2 (continuously adjustable); The energy compensation of the xenon lamp is realized by adjusting the voltage and current.
Irradiation area: about 7500cm2
Distance from arc center to sample holder: 350~380mm
Rotation speed of sample rotating basket: ≥1r/min (stepless speed regulation)
Water spray cycle: Water spray time: 0~99h59min, continuously adjustable; stop spray time: 0~99h59min, continuously adjustable.
Illumination time: continuous programmable control
Blackboard temperature: 65℃±3℃ adjustable
Cooling method: mechanical cooling and air cooling
Total power and power supply: about 15KW; 380V±10% 50HZ
The main technical parameters of the above products are measured at room temperature below 26℃, relative humidity ≤85%R.H, and no-load working room, after two hours of constant temperature and humidity.

Temperature and humidity operation control system
Time Controller: Imported programmable time computer integrated controller

Accuracy range: Setting accuracy: temperature ±0.1℃, humidity ±2%R.H, indication accuracy: temperature ±0.1℃, humidity ±1%R.H
Temperature and humidity sensor: platinum resistance. PT100Ω/MV
Blackboard temperature: Bimetallic blackboard thermometer
Water supply system: Humidification water supply adopts automatic control, xenon lamp cooling water circulation
Temperature Controller: Imported from South Korea, ternary microcomputer touch screen temperature and humidity integrated controller
Circulation system: temperature-resistant and low-noise air-conditioning motor. Multi-blade centrifugal wind wheel
Control system: Mainly composed of operation panel, central controller, various key switches, status indicator lights, executive appliances, etc.

Outer box:
The outer box is formed by CNC machine tools, and the outer shell is formed by high-quality cold-rolled steel plate, and the surface is electrostatically sprayed after pickling and phosphate treatment;
Door and door buckle:
The door seal adopts double-layer refined silicon rubber, so that there is no aging and hardening phenomenon under high and low temperature conditions, and the sealing is more reliable;
The test box is a single door (embedded door handle), with a non-reactional handle;
The door is equipped with an observation window, anti-frost device and switchable lighting lamp;
Observation window:
Size: 25 cm W × 30 cm H;
Radiation-proof hollow glass observation window;
The electric control part of the test box:
This part is the core part of the test chamber;
The main switch of the power supply is an air pressure switch, which controls the overall circuit part;
All line parts have strict line markings for easy maintenance;
Safety protection measures for the electronic control part: When the control system detects the following protection devices (single row), it should be able to automatically cut off the whole system and give an alarm;
Studio over-temperature protection;
Power supply phase loss and leakage protection;
Overcurrent protection of blower motor;
Refrigerator overpressure/overload protection;
Short circuit/overload protection for heaters and humidifiers; Fuse protection;
Working part of the test chamber: Compressor condensation part:
Refrigeration system: The core of the refrigeration system is the compressor. In this solution, we use 2 French Taikang fully enclosed compressors to ensure the cooling requirements of the studio.
The design of the refrigeration system applies energy adjustment technology. An effective treatment method can ensure that the energy consumption and cooling capacity of the refrigeration system can be adjusted under the normal operation of the refrigeration unit, so that the operation cost and failure of the refrigeration system The rate dropped to a more economical state.
Refrigeration evaporator: The evaporator is located in the interlayer of the air duct at one end of the test box, and it is forced to ventilate by a blower motor to quickly exchange heat.
Refrigeration system cooling method: forced air cooling;
Refrigerant: R404a; (environmental friendly refrigerant)
Heating part: Heating: Direct heating in the test box;
The military-grade stainless steel finned heating tube is adopted, and the heating rate is stable, which can keep the temperature in the box without sharp changes. It has the advantages of corrosion resistance, high and low temperature resistance, no leakage, and easy installation; Using SSR (solid state relay) output control, it has the advantages of no noise, reliable work, long life, strong anti-interference ability, fast switching speed, small external interference, and convenient use;
Rain shower system:
The rain shower system is mainly composed of nozzles, solenoid valves, water supply sources and connecting hoses.