Model |
HMCCT1603 |
HMCCT2493 |
Internal size |
135x95x125(WxDxH)cm |
210x95x125(WxDxH)cm |
External size |
166X95X158(WxDxH)cm |
296X125X182(WxDxH)cm |
Power supply |
AC1ø 220V 20A 50HZ |
AC 380V 25A 50HZ |
Test box interior |
Use GRP as a whole, thickness 5mm. Temperature-resistant can reach -40~120ºC. Make our equipment use the CASSI ACSSU NSS test for a long time without deformation. |
Thermostatic case |
Use GRP and PVC grey heat-resistant impact plate, PVC board function is to Protection and Beautification. |
Chamber upper cover |
Use GRP as a whole, thickness 5mm, Temperature-resistant can reach -40~120ºC. Make our equipment use CASS, ACSS, NSS tests for a long time without deformation. Enhanced Security window set and pneumatic cylinder left and right one group (automatic opening and closing). |
Test refill drum |
Use PP whiteboard, volume 100L, independent. |
Test chamber basket frame |
Using GRP heat resistant Corner. Setting product test angle 20°±5°, customizable test supports. |
Saturated air drum |
Made of SUS#304 stainless steel sheet, thickness 2mm. With an automatic water level controller, avoid the inconvenience of manual water addition. |
Use temperature |
According to the standards of CNS, JIS, ASTM adjustable conversion times of 30 min and 15 min. |
Salt water test method |
Test room : 35ºC±1ºC;Saturated air drum: 47ºC±1ºC |
Corrosion resistance test method |
Test room: 50ºC±1ºC; Saturated air drum:47ºC±1ºC |
Drying test |
Chamber temperature:40ºC~80ºC±0.5; Chamber humidity:30± 5%RH and nature humidity |
Constant temperature and humidity test: Chamber temperature |
5ºC~85ºC±2; Cooling time: 60~5ºC about 30
min; Heating time: 5~85ºC about 30 min; Temperature deviation: ±2ºC; Humidity: 30%-98±5%RH
|
Sprinkler test (optional) |
Use automatic pressurized spray saltwater or pure water(according to customer
requirements), automatic discharge outdoor after test over, customized on request. |
Humid- heat test |
GB2423.3-93Basic environmental test rules for electrical and electronic products
Test Ca: constant humid-heat test method. (Just satisfied specified temperature and humidity test)
|