The machine is developed and designed for 90° and 180° peel test, friction test and horizontal tensile test and other related tests.Especially there is a test piece fixing plate with adjustable angle on the machine, and the height and angle of the sensor can be changed according to the needs of users. A variety of peel tests can be performed at different angles.
Characteristic
This machine is operated by computer for machine setting and curve test analysis, which is very convenient in operation.
Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; Can conduct tensile, compression, bending, shearing, tearing and peeling test; The PC and interface board are used to collect, save, process and print the test results of the data; It can calculate parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc.;It can be used for curve processing, multi-sensor support, graphical interface, flexible data processing, MS-ACCESS database support, making the system more powerful.making more powerful function of system.
SPECIFICATION
Capacity selection
5N、10N、20N、50N、100N、200N,500N
Display
Computer display mode
Force Resolution
1/500,000
Strength precision
0.3%
Stroke resolution
1/500,000
Acquisition Rate
50HZ
Control method
Full computer operation mode
Test stroke
800mm
Test Width
100mm
Test Speed
0.1-30000mm/min (can be set)
Force unit switching
kgf,N,Ibf,g,ton,Mpa
Stop Mode
Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function
Machine Dimension
1530 x 470 x 460mm (W×D×H)
Machine Drive
The machine is powered by an AC servo motor, and the moving components are composed of ball screws and high-precision slide rails
Power
400W
Machine Weight
About 85kg
Power Supply
220V 50/60HZ 5A
Standard Configuration
1 set of grips, computer software, USB computer connection wire