Rubber Tensile Testing Machine is specially designed to test the strength of various materials, finished products and semi-finished products. It selects various fixtures and tools and is suitable for measuring the mechanical properties and related physical parameters of various materials under tension, compression, bending, shearing, tearing, peeling, puncture, and other states. It can perform tensile, compression, three-point bending, four-point bending, shearing, tearing, peeling, finished shoe puncture, carton holding pressure, foam cycle compression, spring tension and compression and various dynamic and static cycle tests.
FEATURE
Powerful auxiliary tools for data analysis statistics and curve graph analysis, with functions such as zoom in, zoom out, pan, cross cursor, and point selection. Multiple historical test data can be imported into the graph and displayed at the same time for comparative analysis. Up to 7 interval settings, 40 manual point picking, 120 automatic point picking functions. It has various statistical functions such as maximum value, minimum value, average value, high and low average value, median, standard deviation, overall standard deviation, and CPK value.
SPECIFICATION
Model |
HMS70 |
HMS71 |
HMS72 |
HMS73 |
Capacity selection |
10N,20N,50N,100N,200N,500N,1KN,2KN,5KN(Optional dual-capacity configuration with quick replacement requirements) |
Control method |
Full computer control, powerful software |
Unit of strength |
N,kN,gf,kgf,lbf,kP,tf(SI),tf(long), etc. |
Length unit |
mm,cm,Inch,m,km,um, etc. |
Stress unit |
Pa,Kpa,Mpa,Gpa,KN/m2,N/m2 etc. |
Strength Resolution |
1/500,000 |
Precision |
Better than level 0.5 |
Stroke resolution |
1/500,000mm |
Acquisition rate |
50 times/S |
Effective stroke |
450mm |
700mm |
1000mm |
1300mm |
Speed range |
0.01~500mm/min(customizable) |
Test space |
Ø140mm |
Stop mode |
Overload shutdown, emergency stop button, automatic shutdown of specimen damage, automatic shutdown of upper and lower limit settings |
Machine power |
Servo motor drive |
Machine size (W×D×H) |
520×590×1061mm |
520×590×1325mm |
520×590×1530mm |
520×590×1880mm |
Machine net weight |
45KG |
50KG |
55KG |
70KG |
Power |
400W |
Power supply |
220V 50~60HZ |
Machine equipment |
1 USB\232 cable, 1 software |
Optional accessories |
Two-point extensometer, fixture, computer |
|
|
|
|
Product Image
|