Model |
HM-CTH100 |
HM-CTH-150 |
HM-CTH-225 |
HM-CTH-408 |
HM-CTH-800 |
HM-CTH-1000 |
Inner chamber size W×H×D(cm) |
50×50×40 |
50×60×50 |
60×75×50 |
80×85×60 |
100×100×80 |
100×100×100 |
Exterior chamber size W×H×D(cm) |
78×157×105 |
78×167×115 |
88×185×115 |
108×195×125 |
128×210×145 |
128×210×165 |
Testing temperature range |
0ºC,-20ºC,-40ºC,-70ºC~180ºC |
Testing humidity range |
10%RH~98%RH |
Temp.humi.fluctuation |
±0.3ºC;±0.5%RH |
Temp.humi.uniformity |
±2ºC;±3% empty loading after stablize for 30mins ±2ºC;±3%RH |
Temp.humi.resolution |
0.01ºC;0.1%RH |
Heating&cooling time ºC/min |
Heat-up:3ºC/min(average),cool-down:1ºC/min(average) |
Exterior chamber material |
Cold rolled plate + Powder coating |
Interior chamber material |
SUS#304 Stainless steel |
Insulation material |
Rigid Polyurethane foam |
Circulation system |
Centrifugal fan air circulation system |
Heating system |
SUS# Stainless steel high-speed heater |
Humidification system |
Electrothermal steam humidification |
Dehumidifying |
ADP critical dew point cooling / dehumidifying method |
Refrigeration system |
Finned evaporator + Air(Water) cooling condenser |
Controlling system |
Touch screen controller |
Other components |
Vacuum glass observation window |
Test hole(100mm) |
Controller status indicator |
View light |
Compartment shelf (2 freely adjustable) |
Safety protection device |
Overheat protection circuit breaker |
Humidification system overheat protection |
Compressor overload protection |
Control system overload protection |
overload indicator |
Phase sequence protection |
Water shortage protection |
High voltage and low voltage protection |
Over temperature protection |
Water supply delay protection |
Fan overcurrent protection |
Power supply |
AC 1ψ220V;3ψ380V 60/50Hz |
Customization service |
Non-standard or special requirements are all welcome |