This machine is a pressure testing machine specially developed for computer display screens, which tests the strength that various specifications of display screens can withstand under certain pressure.Suitable for LCD screen manufacturers, computer product development, testing and use.This product realizes the pressure test at any point in the plane by adjusting the X and Y axes. After positioning, the system commands the Z axis to move down. When the set force value is reached, the Z axis stops moving down and keeps the set time. Complete the test curve of force value and time, and can get the result of the test from the test curve, and understand the force capacity of the product.
According to the standard
ISO 7500-1 , JJG475-88 , ASTM E4 , DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2, BS1610,GB T228
SPECIFICATION
Capacity selection
|
10N、20N、50N、100N、200N、500N、1KN、2KN、5KN(Optional dual capacity configuration)
|
Display
|
LED and computer display mode
|
Force Resolution
|
1/500,000
|
Strength Precision
|
0.3%
|
Stroke Resolution
|
1/500,000
|
Control Method
|
Stand-alone operation or Full computer operation mode
|
Test Stroke
|
350mm
|
Test Width
|
420mm
|
Test Speed
|
0.5~500mm/min
|
Force Unit Switching
|
kgf,N,Ibf,g,ton,Mpa
|
Stop Mode
|
Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function
|
Machine Dimension
|
96×45×97cm(W×D×H)
|
Machine Drive
|
Servo motor drive, synchronous wheel and precision ball screw drive
|
Power
|
400W
|
Machine Weight
|
About 80kg
|
Power Supply
|
220V 50/60HZ 10A
|
Standard Configuration
|
1 set of grips, computer software, USB computer connection wire
|
Optional
|
Personal computer
|