Application
HMWTECH’s Shock Test System used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under an impact environment. Suitable for impact testing of aerospace, aerospace, marine, military, consumer electronics, automotive, household appliances and display equipment.
Test requirements
- IEC 62133
- UL 1642
- UN 38.3
Main Technical Parameters
Model |
|
HMBESKT10 |
Specified Load |
|
10 kg, (Including fixtures and test specimen) |
Bench Dimension |
|
L200×W200 mm |
Pulse Wave |
|
Half sinusoidal wave |
Shock Impact Peak Acceleration |
|
150~15000 m/s2 |
Pulse Duration |
|
0.6~20ms |
External Dimension |
|
L1000mm×W500mm×H2700mm |
Total Weight |
|
1500 kg |
Impact Form |
|
Free fall |
Max. Drop Height |
|
1500mm |
Power Supply |
|
Three phase 380V,50/60 Hz |
Hydraulic Source |
|
With the equipment |
Ambient Condition |
Temperature |
0~40℃ |
|
Humidity(25℃) |
<85% |
Reliability |
|
1.Average failure-free accumulation working time ≥ 1000h; |
|
|
2.The half-sine waveform generator has no less than 5000 consecutive impacts; |
|
|
3.The half-sine waveform generators have a storage time of no less than 5 years in a clean, room temperature environment. |
Testing System |
|
Shock DAQ, Impact, collision measurement control system |
Usage Standard |
|
GJB150、GJB360、GJB548、GB/T2423、GJB1217、JJG497、GIEC68-2-27 |
Testing Standard |
|
Acceleration amplitude, pulse width, uniformity, and lateral motion ratio meet the requirements of JJG541-88. |