Product Discription
The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Characteristics
◆ Appearance: high texture appearance, the body adopts circular arc shape, the surface is processed by fog stripe, and adopts plane non-reaction handle, easy to operate, safe and reliable.
◆ Observation window: rectangular multi-layer glass viewing window, which can be used to observe the test products in the test. The window is equipped with anti-sweat electric heater, which can be used for waterproof gas condensation water drops, and high brightness PL glister light to keep the lighting inside the box.
◆ Water supply system: It is equipped with an external water supply system, which is convenient for supplementing the water supply in the humidifying drum and recycling automatically.
◆ Compressor: The compressor circulation system adopts French "Taikang" brand, which can effectively remove lubricating oil between condensing tube and capillary tube, and the whole series adopts environment-friendly cold coal (R404, 507).
◆ Control mode: intelligent PID+SSR/SCR positive and negative two-way synchronous output, including advanced slope control logic.
◆ Controller: with multi-segment program editing and temperature and humidity can do fast (OUICK) or slope (SLOP) control.
◆ System capacity: 150 groups of programs ×1500 sections can be logged in, the number of sections can be divided arbitrarily, and the programs can be freely connected to each other.
◆ Cycle setting: 9999×999 times cycles can be performed, and 5 separate cycles can be cut out.
◆ Time signal: 3 sets of timing control output interfaces, with 10 timing control modes, to facilitate the execution of timing planning for the start/stop of external driver components.
◆ Safety inspection: 15 items of full-function system detection to ensure safe operation of the machine.And can automatically display the time of failure, items and elimination countermeasures.
SPECIFICATION
Model
|
TS-80-40M
|
TS-150-40M
|
TS-225-40M
|
TS-408-40M
|
TS-1000-40M
|
Capacity
|
80L
|
150L
|
225L
|
408L
|
1000L
|
Interior size (cm)W*H*D
|
40*50*40
|
50*60*50
|
50*75*60
|
60*85*80
|
100*100*100
|
Exterior size (cm)W*H*D
|
93*131*81
|
100*155* 110
|
100*170* 120
|
110*180* 140
|
150*195* 165
|
Single maximum currently(A)
|
8A
|
10A
|
13A
|
14A
|
24A
|
Rated power(KW)
|
3.5KW
|
6KW
|
7KW
|
9KW
|
13KW
|
Weight(KG)
|
260
|
310
|
320
|
400
|
700
|
Temperature range
|
-40℃~+150℃
|
Temperature stability
|
±0.5℃
|
Temperature uniformity
|
±2.0℃
|
Humidity range
|
20%~98%RH
|
Humidity stability
|
±1.5%
|
Humidity deviation
|
≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH
|
Heating up
|
heat up from -40℃ to +150℃,≤60mins
|
Cooling down
|
cool down from +20℃ to -40℃, ≤40mins
|
Ambient temperature
|
ambient temperature condition for the chamber working:+5℃~+35℃
|
Exterior material
|
1)stainless steel; 2)galvanized steel sheet bake finish
|
Interior material
|
SUS304 stainless steel
|
Insulation technology
|
outer rigid polyurethane foaminter glass fibre cotton
|
Refrigeration mode
|
mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling
|
Refrigeration compressor
|
totally enclosed plunger compressor imported from France (low noise/environment protection)
|
Refrigerant
|
environment protection R404A(DuPont)
|
Circulating fan
|
high temperature induction motorcentrifugal wind wheel
|
Heater
|
high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater
|