Product Application
This device is used to evaluate the impact of accidental falls on product performance during actual use by customers. It is suitable for drop testing of small electronic products such as mobile phones, PADs, e-books, laptops, and other small electronic products in a specified direction or location. It is fixed by suction cups, and can also be used as a chuck type to test mobile phones, laptops, and so on.
Product Features
▪ Double column linear bearing guide, servo motor+synchronous belt drive lifting, testing height can be arbitrarily set, and positioning is accurate.
▪ The fixture includes two types of chuck fixture and clamping fixture, which can meet the user's requirements for drop testing of product edges, corners, and surfaces.
▪ Touch screen+PLC control, which can set and display data such as test height and drop times.
▪ It has a sealed protective cover, a fully enclosed peripheral frame, and a screen door that stops and opens to ensure the safety of the operator.
Major function
▪ Directional drop test
▪ Free Drop Test
▪ Automatic and manual functions
▪ Reference height compensation function
▪ The drop height and test times can be set
▪ Safety door protection function (safety door opens, equipment does not start, protecting operator safety)
Specifications
▪ Drop height: can be set within the range of 300-2000mm, with displacement accuracy of ± 0.5mm
▪ Drop angle: 6 sides, 8 corners, and 12 edges of a rectangular sample can be dropped
▪ Clamp holding sample size: 7 "- 17"
▪ Test data: drop height and number of tests
▪ Test sample specification: maximum allowable weight 5000g
▪ Material of falling surface: marble, thickness of 50mm and 20mm, wood board (thickness of wood board is 20mm)
▪ Drive mode: servo motor+synchronous toothed belt
▪ Control mode: touch screen+PLC
▪ Air source requirements: clean compressed air not less than 0.6MPa
▪ Power requirement: AC220V ± 10% 50Hz
▪ Equipment power: 400W
▪ Overall dimension: about 950 * 1200 * 2800mm
▪ Equipment weight: 400Kg