HM400W series melt flow rate tester is based on the test method of GB/T 3682, used to determine the fluidity of thermoplastic polymers at high temperatures, such as polyethylene, polypropylene, polyoxymethylene, ABS resin, and polycarbonate , Nylon fluoroplastics and other high polymer measuring instruments adopt industrial PLC programmable controller, touch screen operation platform, Chinese and English liquid crystal display; the automatic temperature control of this machine is divided into manual, time control and automatic three cutting methods from the operation method. It can realize two test methods: mass method (MFR) and volume method (MVR); the machine can measure the melting density of raw materials at the test temperature, and the system also has a temperature calibration function.
This machine is equipped with a micro-printer that can print test reports. It is currently a mid-to-high-end model in the same industry in China. It has simple operation, stable operation, and long-term testing. It is well received by users.
SPECIFICATION
| Measuring range |
0.1-800.00g/10min（MFR）；0.1-800.00 cm3/10min（MVR） |
| Temperature range |
Room temperature -450℃ |
| Temperature control accuracy |
±0.5℃ |
| Timing accuracy |
0.1S |
| Displacement accuracy |
0.01mm |
| Load |
Full load |
| Cutting method |
Manual, time control, automatic |
| Inner diameter of barrel |
9.550mm±0.025mm |
| Barrel length |
160mm |
| mouth model |
Material is tungsten carbide, length: 8.000mm±0.025mm inner diameter: 2.095mm±0.005mm |
| Power |
0.45KW power supply: AC220V, 50Hz |
| Instrument size |
400mm×500mm×600mm |
| Instrument net weight |
65Kg |
